Original price was: 160,00 €.139,00 €Current price is: 139,00 €.
The Halti Fjalla 2 DX Ice Control is a warm and waterproof men’s winter boot designed for outdoor activities in cold and slippery conditions. Thinsulate™ insulation, a DrymaxX® waterproof membrane and a Michelin Ice Grip outsole combine warmth, weather protection and grip. The lightweight Phylon midsole and soft lining add comfort for winter walks.
Measure your foot from the tip of your toes to the back of your heel. Add approximately 1.5 cm to your foot length to determine the required insole length.
The measurements are indicative. Please note that Halti states that the Fjalla 2 DX Ice Control runs small and recommends choosing one size larger than usual.
| EUR | US N | US M | Insole length (cm) |
|---|---|---|---|
| 36 | 6 | 24,0 | |
| 37 | 6,5 | 24,5 | |
| 37,5 | 7 | 5,5 | 25,0 |
| 38 | 7,5 | 6 | 25,6 |
| 39 | 8 | 6,5 | 26,0 |
| 39,5 | 8,5 | 7 | 26,4 |
| 40 | 9 | 7,5 | 26,8 |
| 41 | 9,5 | 8 | 27,2 |
| 42 | 10 | 8,5 | 27,6 |
| 42,5 | 9 | 28,0 | |
| 43 | 9,5 | 28,5 | |
| 44 | 10 | 29,2 | |
| 44,5 | 10,5 | 29,6 | |
| 45 | 11 | 30,0 | |
| 46 | 11,5 | 30,4 | |
| 46,5 | 12 | 30,8 | |
| 47 | 13 | 31,3 | |
| 48 | 13,5 | 32,0 | |
| 49 | 14 | 32,7 |
Brand: Halti
Model: Fjalla 2 DX Ice Control
Weight: 0.8 kg
Membrane: DrymaxX®
Insulation: Thinsulate™
Midsole: Phylon
Outsole: Michelin Ice Control friction sole
Insole: Insulating EVA footbed
Fit: Runs small; manufacturer recommends choosing one size larger than usual.
Synthetic nubuck: 50% recycled polyester / 50% polyurethane.
Rubber reinforcement: 100% rubber.
Rubberised polyurethane: 97% polyurethane / 3% rubber.
Insole: EVA.
Outsole: Michelin Ice Control friction sole.
Clean the surface with a damp sponge and mild soap.
Carefully wipe away any soap residue.
After cleaning, leather should be treated with a suitable leather conditioner or polish.
If the boots get wet, dry them at room temperature or in a drying cabinet at a low temperature, maximum 40°C.
Do not dry the boots on a radiator or in a hot sauna.
Allow the boots to dry in a well-ventilated space.
Paper can be placed inside the boots to absorb moisture.
Store in a dry, well-ventilated place at room temperature.
Brush or wipe away sand, mud and dust from the boots, including the inside, after use.
The Halti Fjalla 2 DX Ice Control is a men's winter boot combining waterproof construction, insulation and a Michelin Ice Grip outsole designed for slippery winter surfaces. It is suitable for winter outdoor activities and everyday use when comfort and grip are important.
Thinsulate™ insulation works together with the insulating Thermo footbed to help keep your feet warm in cold conditions. The soft textile lining adds comfort, while the sock-like construction provides a comfortable feel.
The Fjalla 2 features a waterproof DrymaxX® membrane designed to prevent moisture from entering the boot. The lace-up fastening allows you to adjust the fit.
The boot has a roomy last, but Halti recommends choosing one size larger than usual because this model runs small.
The lightweight Phylon midsole provides cushioning and adds comfort when walking. The anatomically shaped insole is removable and can be taken out when needed.
The Michelin Ice Grip friction outsole is designed to provide grip on ice and snow. This makes the Fjalla 2 an option for winter walks and outdoor activities on slippery surfaces.
The upper features synthetic nubuck, with rubber reinforcements and rubberised polyurethane also used in the construction.
Men's winter boot.
Waterproof DrymaxX® membrane.
Thinsulate™ insulation.
Soft textile lining.
Insulating Thermo footbed.
Removable, anatomically shaped insole.
Michelin Ice Grip outsole.
Lightweight Phylon midsole.
Sock-like construction.
Lace-up fastening.
Roomy last.
Runs small; Halti recommends choosing one size larger than usual.
